GTCO Super L III - Users Guide User Manual
Page 57
Advertising
Super L III 57
Table 4: GTCO/CalComp High Resolution Binary Format
To set up the GTCO/CalComp Binary Format:
Tablet Configuration Utilities:
1. Select GTCO Binary or CalComp Binary (under Output Format Options).
2. Choose the desired resolution (under Mode Options).
GTCO Commands:
1. Send command BI for Binary format.
2. Send command IN for English or command MT for metric measurements.
3. Send command HR for 1000 lpi/40 lpmm or command H1 for 2000 lpi/100 lpmm
resolution.
Advertising