GTCO Super L III - Users Guide User Manual
Page 8
Super L III 8
Installing Super L III
The following topics provide instructions for putting the Super L III system together and
attaching it to your computer.
NOTE: Before you begin, please take a moment to fill out and mail the Warranty
Registration Card or register your digitizer on our website at
Mounting a Large Super L III Tablet
Super L III can be placed on a table, desk or drafting table. Alternatively, you can mount a
tablet on a workstation stand available from a variety of manufacturers. Instructions will
be packed with the stand. GTCO CalComp by Turning Technologies also provides Universal
Mounting Brackets, as an option that allow the digitizer to be mounted to virtually any
pedestal. Contact GTCO CalComp by Turning Technologies for price and availability.
NOTE: Do not drill holes in any GTCO CalComp by Turning Technologies tablet. Drilling
holes in any part of the tablet will void the warranty and may result in the purchase of a
new tablet.
Connecting to Your Computer
Connect the round end of the serial cable to the jack
labeled “I/O” on the Controller. The arrow on the
connector should face up.
Attach the 9-pin or 9- to 25-pin connector to the
serial port on back of your computer.
Connecting the Power Supply
Connect the power supply’s cable to the jack on back
of the serial cable’s connector. Plug the power
supply into a power outlet or power strip.