GTCO QuikRuler III - Users Guide - Manual (Page 20)

QuikRuler III 20
4. Click on the button to save your setting, or choose another option or function
to save your setting and activate the selected function.
5. To view the current Auto Scale setting, click on the button.
Setting the Counting Scale
You can use QuikRuler’s function to count areas or other components on your
drawing. For example, if you are using QuikRuler III to estimate how much electrical wiring
will be required for a building, you could use the function to count how many
electrical outlets will be needed. Normally, QuikRuler III counts by ones. However, you can
change the scale to something else using the function. For example, you can
use the function to tell QuikRuler III to count by fives, tens or some other value –
even fractions.
Change the Counting Scale
1. Click on the button to activate the Count Scale function.
QuikRuler displays the current counting scale under the flashing cursor.
2. Select the appropriate number on the QuikRuler Menu. For example, click on the
and buttons if you want to count by tens.
3. Click on the button to save your setting, or choose another option or function
to save your setting and activate the selected function.