GTCO QuikRuler III - Users Guide - Manual (Page 21)

QuikRuler III 21
Measurements
The following sections can describe how to use QuikRuler III to measure the components of
your drawing.
Measuring the Size of an Area
QuikRuler III can instantly calculate the size of an area on your drawing. Follow these steps:
1. Click on the button on the QuikRuler Menu to activate the Area
calculation function.
2. Press and hold down the stylus tip on the outer edge of the area you want to
measure.
3. While still holding the stylus tip down, trace around the perimeter of the area with
the stylus.
4. Lift the stylus tip when you have finished tracing the area.
QuikRuler III displays the size of the area in the units you specified.