GTCO QuikRuler III - Users Guide - Manual (Page 6)

QuikRuler III 6
Connecting the Components
1. Connect the 8-pin mini-DIN end of the digitizer interface cable to the QuikRuler III
Display Module.
2. Attach the RJ12 end of the digitizer interface cable to the digitizer.
3. Join the stylus or optional cursor to the digitizer when using a corded pointing
device.
4. Connect the power supply to the digitizer.
Optional: If you are inputting data to the computer, link QuikRuler III to the
computer, using the USB cable.
Digitizer Connections
QuikRuler III Display Module Connections