GTCO QuikRuler III - Users Guide User Manual
Page 25
QuikRuler III 25
3. To measure another segment, click on its starting and ending points. You do not
have to click on the
button first.
NOTE: Each measured segment is automatically summed with previously measured
segments when in Length Segment Mode.
4. To start a new sum, click on the
button.
Measuring a Continuous Length
Use the
function to measure a curved length.
1. Click on the
button.
2. Press the stylus tip down on the starting point of the length and hold.
3. Trace along the length of the segment until you reach the ending point.
4. Lift the stylus tip.
QuikRuler III displays the length of the line.
5. If the segment you are measuring is a straight line, click on the starting point of the
line, lift up the stylus and click on the ending point.