GTCO Surface-Lit AccuTab - Users Guide - Manual (Page 16)

Surface-Lit AccuTab 16
Introduction to the Custom Configuration Menu
The AccuTab with its Controller uses the Custom Configuration Menu to control baud rate,
data format and other operating characteristics.
Using the Custom Configuration Menu
If your application does not have an AccuSet Menu Code or if a different configuration is
required, then use the Custom Configuration Menu to format AccuTab. The Custom
Configuration Menu replaces the 24 switches associated with the older Type 5A Controller.
Configurations you set up can be stored in any of ten user-definable AccuSet locations
(codes 90 through 99) for recall at a later time. This allows the AccuTab to be easily
switched between applications.