GTCO Surface-Lit AccuTab - Users Guide - Manual (Page 19)

Surface-Lit AccuTab 19
either odd parity or even parity – or they must be set for no parity. Choices are:
None (N), Even (E) or Odd (O).
Output Format Options
 GTCO: Selects GTCO-compatible formats. See Advanced Programing Information for
greater detail on GTCO format structure. Choices are: Binary or ASCII.
 CalComp: Selects CalComp-compatible formats. See Advanced Programming
Information for greater detail on CalComp format structure. Choices are: Binary,
ASCII 1, ASCII 2, ASCII 3 or ASCII 4.
 Summa: Selects Summagraphics-compatible formats. See Advanced Programming
Information for greater detail on Summagraphic format structure. Choices are:
Binary or ASCII.
ASCII formats can be modified by including or excluding a button code, decimal point,
carriage return or line feed, depending on whether GTCO, CalComp or Summa formats
have been selected.
 Button: Defines whether the Pushbutton (Pb) value is included in the ASCII output
report. This option is available only with GTCO formats. Choices are: Include or
Exclude.
 Space: Defines whether the Space (Sp) character (hex 20) is included in the ASCII
output report as a delimiter between the X and Y coordinate values. This option is
available only in GTCO formats. Choices are: Include or Exclude.
 Decimal: Defines whether the period character (hex 2E) is included in the ASCII
output report between the units and tenths digits. This option is available only in
Summagraphics formats. Choices are: Include or Exclude.
 Return: Defines whether the Carriage Return (CR) character (hex 0D) is included in
the ASCII output report as a terminator. This option is available in GTCO and
Summagraphics formats. Choices are: Include or Exclude.
 Line Feed: Defines whether the Line Feed (LF) character (hex 0A) is included in the
ASCII output report as a terminator. This option is available in GTCO, CalComp and
Summagraphics formats. Choices are: Include or Exclude.