Corinex Global ADSL2+ - Manual (Page 101)

100
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
To update your gateway firmware, choose an update image (Kernel/Filesystem) or
configuration file in Select a File, and then click the Update Gateway button.
Additionally, you may download your configuration file from the system by clicking
Get Configuration.
The system will be restarted automatically, after the Filesystem image is successfully
updated. You will need to reconnect again to configure your setup.
4.6.5 Ping Test
Once you have your Gateway configured, it is a good idea to make sure you can
ping the network. You can get to the Ping Test page by clicking on Ping Test in the
left menu.