Corinex Global ADSL2+ - Manual (Page 91)

In the default settings, wireless security is disabled and anyone can connect to your
access point. This setting is not recommended if you want to maintain a secure
wireless network, prevent 3rd parties from using your internet connection and
prevent any attacks into your local network.
You can select between WEP, 802.1x and WPA security.
WEP
After clicking on WEP, the following page opens.
90
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
You can enable or disable WEP security by selecting or unselecting the Enable WEP
Wireless Security checkbox.
After enabling the WEP security, select the Authentication Mode. The respective
settings are explained in the table below.
Authentication Mode Description
Open The simplest authentication method. After the
wireless client sends out a request , the access
point will authenticate it.
Shared This method uses a WEP-encrypted password
for authentication. The client is authenticated by
the access point only if the passwords match.
Both Open or Shared will be selected automatically.