Corinex Global ADSL2+ User Manual
Page 62
61
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Field Definition/
Description
Username
In this field please enter your DynDNS user-
name
Password
In this field please enter your DynDNS pass-
word.
After setting up, please click on Apply.
4.4.6 IP
QoS
When QoS is enabled in the Gateway, the designated machine, application or per-
son would have precedence over peers when competing for bandwidth. The IP
QoS Setup page allows you to configure QoS for a connection, view previously
configured QoS rules, add a new rule, or delete an existing rule.
Each output device has three priority queues associated with transmit data. The
high priority queues have strict priority over the medium priority and low prior-
ity queues, and therefore can exhaust all available bandwidth. The web UI will
allow the user to select the weights of the medium and low priority queues in
increments of 10 percent so that that the sum of the weights of the 2 queues is
equal to 100 percent. These queues will be serviced on a Round Robin priority
basis according to the weights assigned, after the high priority queues have been
completely serviced.
In the following table, you can find a description of all settings in this screen.