Corinex Global ADSL2+ - Manual (Page 69)

68
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
In the table below you can see the description of this screen.
Field Description
Enable DMZ Enable/disables the Demilitarized Zone feature. This field is
unchecked by default.
Select your WAN
Connection Select the WAN Group you are going to apply the DMZ
feature.
Select LAN Group Select the LAN Group you are going to apply the DMZ
feature.
Select a LAN IP
Address Select the LAN IP address you are going to use as the DMZ
host. This computer will be exposed to the Internet. Be
aware that this feature may expose your local network to
security risks.
LAN Clients This link will take you to the LAN Clients screen.
2. Check the Enable DMZ box on the DMZ setting screen.
3. Select the WAN Group, LAN Group, and LAN IP Address. DMZ is
configurable per LAN segment.
4. Click Apply to enable the DMZ.
4.4.9 Custom Port Forwarding
The Custom Port Forwarding screen allows you to create up to 20 custom port
forwarding entries to support specific services or applications; such as Concurrent
NAT/NAPT operation.