Corinex Global ADSL2+ - Manual (Page 33)

32
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Since multiple users can use the gateway, the gateway can simultaneously
support multiple connection types; hence, you must set up different profiles for
each connection. The gateway supports the following protocols:
• RFC2516
PPPoE
• RFC 2364 PPPoA
• Static
• DHCP
• Bridged
• CLIP
4.3.6 New Connection
A new connection is basically a virtual connection. Your gateway can support up
to 8 different (unique) virtual connections. If you have multiple different virtual
connections, you may need to utilize the static and dynamic routing capabilities of
the modem to pass data correctly.
Before you create a new WAN connection, you should make sure you have DSL
connection. If you have an existing DSL connection a green light will be displayed in
the left menu next to the Modem item as shown in the picture below.
Click on New Connection to enter the page for creating and configuring a new
connection to the internet. The following page will appear, with predefined settings
for a PPPoE connection.
Note: This screen can be virtually divided into three sections. Section A
includes settings specific to the connection type. Section B (VLAN settings) and
section C (PVC settings) remain the same for all six connection types. For other
connection types, we will focus on the fields and features in section A.