Corinex Global ADSL2+ - Manual (Page 84)

83
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
4.4.22 Access Control
Access control allows you to open the access from the Internet (WAN) or LAN to
the following management ports of the Gateway:
• Telnet
• Web
• FTP
• TFTP
• Secure Shell (SSH)
• SNMP
4.4.21 Routing Table
This screen show the current routing table of the ADSL2+ Wireless Gateway G.
As you can see from the picture, the Access Control is disabled by default, remote
management from the WAN side IP addresses is denied, most services from the
LAN side IP addresses are enabled.
Access Control, when enabled, supports up to 16 IP addresses with controlled
(allow/deny) WAN and/or LAN access.