Corinex Global ADSL2+ - Manual (Page 27)

Local Area Network connection
On the other side of your Gateway, you have your own Local Area network (LAN)
connections. This is where your local computers are connected to the Gateway. The
Gateway is normally configured to automatically assign IP addresses for all the PC’s on
your network.
4.3.1 Quick Start
For your convenience, we have prepared a setup wizard which will allow you to connect
your Gateway to the internet in a few easy steps.
Click on Quick Start located on top of the left menu. The following screen will appear.
26
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
All information for creating a connection should be provided by your Internet Service
Provider. Please enter the necessary information into the fields on this screen. If you
are not sure, please contact your Internet Service Provider. Click Connect.
The gateway will now connect to your Internet Service Provider. A few screens
displaying the connection status will appear. If all the required authentication data
was entered correctly and the gateway is connected to the DSL line, a screen similar
to the one below will appear.