Corinex Global ADSL2+ - Manual (Page 97)

96
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Multiple SSID
The Gateway supports multiple SSID, all of them can be set in the following
screen.
Note: Multiple SSID support will be disabled if wireless security is enabled.
You can enter a new SSID into the SSID: field and click Add.
If you want to delete any of the assigned SSID strings, you can click the radio button
Delete in front of the displayed SSID.
After the configuration, click Apply. To enable the new settings you will have to
restart the access point. Please go to the System Commands section in the Tools
tab as shown below and click on Restart Access Point.