Corinex Global ADSL2+ - Manual (Page 57)

56
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Field Description
Timeout If the Gateway failed to connect to a SNTP server within
the ‘Timeout’ period, it will retry the connection.
Polling Interval Time between a successful connection with a SNTP server
and a new attempt to connect to an SNTP server.
Retry count The number of times the Gateway will try to connect to
an SNTP server before it try to connect to the next server
in line.
Time Zone The time zone of the Gateway.
Day Light Check/uncheck this option to enable/disable day light
saving.
4.4.3 SNMP
SNMP (Simple Network Management Protocol) is a troubleshooting and management
protocol, which uses the UDP protocol on port 161 to communicate between clients and
servers. The following picture shows the default SNMP screen.
SNMP uses a manager MIB (management information base) agent solution to fulfill the
network management needs. The agent is a separate station that can request data from
an SNMP agent in each of the different managed systems in the network. The agent uses
the MIBs as dictionaries of manageable objects. Each SNMP-managed device has at least
one agent that can respond to the queries from the NMS. The SNMP agent supports
GETS, SETS, and TRAPS for 4 groups with MIB-II: System, Interface, IP, and ICMP.