Analog temperature sensor loop, Nalog, Emperature – Novak Sentry Data Logger User Manual
Page 10: Ensor
Novak Electronics, Inc.
|
Device Setup
1
1
0
0
www.teamnovak.com
ANALOG TEMPERATURE SENSOR LOOP
Sensor Description: The Analog Temperature Sensor Loop uses a high-temperature thermistor to accurately
measure temperature on circular objects, such as mufflers and motors.
Measurement Range: 0-150°C (0-302°F)
Accuracy: ±3%
Plugs Into: The 2-pin connector plugs into the Engine Temperature Slot
(ENG.T) in the Novak Sentry Data Logger unit. There is no polarity for
this sensor connector.
Default Settings (
configurable setting
):
Graph Color:
Max Value (Gauge display only): 300°F
Name String: Analog Temp
Installation Instructions
(refer to image shown right):
Install loop around circular object, such as a Nitro or gas cylinder
head, exhaust pipe, electric motor or speed control.
Using the O-ring, tighten the loop around the object.
Replacement Part Number: Nov