Slant/Fin CHS-399 - Manual (Page 11)

CHS Series Controller and Display
│
Slant Fin Corp.
9
2.4 Advanced Setup
Figure 2-7 Advanced Setup (Menu) Screen
Advanced Setup – menu screen, accessed by
selecting “Advanced Setup” from the “i-Information”
screen, lists all of the configuration parameter groups.
Use the up and down (▲▼) buttons to navigate the
menu options; when the desired option is highlighted
select by pressing the “OK” button.
Login – adjustment of many of the advanced settings
will prompt the user to login.
Table 2-5 Advanced Setup Menu Options
Name Description Reference:
CH Config Edit Central Heat settings; CH1 heat input. Section 2.4.1
DHW Config Edit Domestic Hot Water settings. Section 2.4.2
Lead Lag Config Edit Lead-Lag Master and Slave settings; CH2 (LL) heat input. Section 2.4.3
System Config Edit temperature units, anti-short-cycle time, alarm silence time. Section 2.4.4
Modulation Config Edit burner modulation settings. Section 2.4.5
Delta T Limits Edit delay time for delta-t limit. Section 2.4.6
T-rise Limits Edit delay time for T-rise limit. Section 2.4.6
Frost Protection Config Enable/disable CH, DHW and LL frost protection Section 2.4.7
Burner Timings & Rates Read only, for information only. Section 2.4.8
Burner Control Ignition Read only, for information only. Section 2.4.9
CH Config
DHW Config
Lead Lag Config
System Config
Modulation Config
Delta T Limits
T-rise Limits
Frost Protection Config
Burner Control Timings & Rates
Burner Control Ignition
Advanced Setup