Toa DP-K1 - Manual (Page 12)

12
4.1.5. Memory
Change
Memories 1 – 8: Recalls one out of 8 preset memories.
Store
Memories 1 – 8: Writes setting contents in one of 8 memories.
Names... : Changes the name of preset memory.
4.1.6. Remote
Connect... : Connects the unit to a PC for online processing.
Disconnect: Disconnects the unit from a PC for offline processing.
Note
The unit's setting does not change while in the offline state even if it is
changed with a PC.
Bulk Transmission: Transmits data of the currently opened file to the unit.
Bulk Receiving: Receives the unit's data.
Automatic Connection: Makes an automatic connection when the file is opened next time.
Firmware Version: Displays the unit's firmware version number. (Only valid when connected
online.)
Connection Settings : Allows you to perform network settings and to designate the unit's IP
address to which this software can access.
Simple Connection: Connects the PC to the unit using the unit's MAC address.
Unit's network settings are not needed.
Note
This connection method is available only for the system consisting of only
the units (10 units or less), PC, and switching hub that are connected to a
closed network.
4.1.7. Option
Security Settings... : Performs user level settings and restricted operation settings.
External Control...
Contact Input: Sets the contact inputs of the D-981 or D-983 Remote Control Module.
Contact Output: Sets the contact outputs of the D-981 or D-983.
Export to CSV File
ARC Filers: Outputs the parameters of all ARC filters for the memory being selected
as a CSV file.
4.1.8. Help
About... : Displays the DP-K1 Setting Software version number.