Toa DP-K1 - Manual (Page 71)

71
If all data for the Module settings and the Module status do not match exactly, the following dialog is
displayed on connection establishment.
If data and status for the module do not match;
The unmatched data on module models are highlighted in red as shown above.
Unless all data for the Module Settings and the Module Status match with each other, the unit does
not operate correctly.
[Operating the unit according to the Module setting data]
Press the [No] button to disconnect communications, and reinstall modules into the unit according to
the Module settings data.
[Operating the unit according to the Module status data]
Press the [No] button to disconnect communications, and change the Module settings data. (for
procedures, refer to
p. 19 .)
Tip
Pressing the [Yes] button permits correct operation only for the unit's slot-mounted modules of which
Module Settings and Module Status data match with each other.
• Unit ID of File:
Unit ID of the setting data on the PC
• Slot No:
Slot number of the module on the unit's
rear panel
• Module Settings:
Model of module preserved in memory
• Module Status:
Model of module inserted in unit