Toa DP-K1 User Manual
Page 75
Advertising
75
• For the unit to be connected over a WAN (beyond a router), use this screen to add it if not added in
(1) Press the [Add] button.
The "Add Target Unit" screen is displayed.
(2) Enter the IP address for the unit to be added, then press the [OK] button.
The unit is added to the list on the Bulk Receive screen.
The selected unit is deleted from the list on the Bulk Receive screen.
• If the unit unnecessary to be connected is displayed, delete it.
Select the unit to be deleted, then press the [Remove] button.
Advertising