Toa DP-K1 - Manual (Page 27)

27
9.4. Digital Input Module View (Available only when the D-937SP is used)
Click the [D-937SP] box displayed on the input slot in the Flow View. The Digital Input Module View is then
displayed.
(1) Channel status indication [Status]
Displays the input signal status of the selected channel.
Display Input signal status
LOCK Normal
UNLOCK No cable connected or equipment power not turned on
Non AUDIO Not an audio signal
Non PCM Not PCM data
DTS CD DTS CD
The indications are shown by black text on white background for the LOCK status, and white text on red
background for the error status.
In error status, the error status indicator lights red on the "D-937SP" box in the Flow View as shown below.
(2) Sampling frequency indication [Fs (Hz)]
Displays the sampling frequency of the selected channel.
(3) Pre-emphasis ON/OFF status [Pre Emphasis]
Displays the pre-emphasis ON/OFF status of the selected channel.
(4) D-937SP module input selection (Line selection) [1, 2, 3, 4]
Displays the selected status of the D-937SP module's inputs 1 – 4. The selected input is indicated by the
symbol. Double-clicking the input indication switches the selection status between "selected" and
"unselected."
Note
Unlike the MIX ALL mode of the D-936R, only one input can be selected.
Error status indicator
(1)
(2)
(3)
(4)