Toa DP-K1 - Manual (Page 49)

49
11. ARC MEASUREMENT VIEW AND MEASURING PROCEDURES
11.1. ARC Measurement View
The ARC measurement view is the screen used to make
measurements for creating sound field correction filters.
To display the ARC measurement view, click on the ARC
view's [Measurement Viewer] button or select [View
ARC
Measurement View] on the menu. The results of the ARC
measurement are displayed on the ARC view.
(For measuring procedures, refer to
p. 51 .)
(1) Frequency response display area
(2) Zone name box
Displays a zone name. (For zone name entry, refer to p. 20 "Changing Equipment Names." )
(3) Multi-point filter calculation selector button
Selects point data to be used for making multi-point filter calculations. Setting this button to ON displays
frequency characteristics.
(4) Measuring point color change button
If this button is pressed, a dialog for setting the color is displayed,
allowing the display color of characteristic display curves for each
measuring point to be changed.
(5) Zone color change button
If this button is pressed, a dialog for setting the color is displayed,
allowing the display color of each zone on the Flow View to be
changed.
(1) (2) (3) (4) (5) (6)
(7) (8)
ARC measurement view ARC view