Toa DP-K1 - Manual (Page 28)

28
9.5. Gain View (Gain Settings)
The Gain view appears if you click the [Gain] box .
(3)
(4)
(2)
(1)
(3)
(5)
(2)
[Gain view] (Former stage of input section)
[Gain view] (Latter stage of input section, and output section)
(1) Grouping button [Grouping No.]
The group number is displayed when grouping has been set, and the "Off" indication is displayed when no
grouping has been set.
Clicking on this button permits grouping to be set or cancelled on the pull-down menu.
Select either "New Group" or the number
of a group that has already been set.
Only when "New Group" has been selected,
select either "Same Value" or "Keep Offset."
Same Value: Makes gain values within the
group identical.
Keep Offset: Permits values to be changed
without changing the relative gain
values within the group at the time
of group setting.