Toa DP-K1 - Manual (Page 23)

23
8. FLOW VIEW
The flow view displays a block diagram that shows the
signal-processing image of unit using functional boxes.
* 1 Indicates input/output signal levels by LED lighting
conditions as follows.
Red: –6 dB or more
Green: –66 dB to less than –6 dB
Gray:
Under –66 dB
* 2 Double-clicking on the gain box or pressing the
Mute button in the gain view for the latter stage of
input section switches the mute function between
ON and OFF.
Mute ON:
* 3 Double-clicking on the mute box or pressing the
Mute button in the output gain view switches the
mute function between ON and OFF.
Mute ON:
Mute OFF:
* 4 The MAC address is displayed when the "Simple
connection" (see
p. 78 ) is performed.
Matrix (See p. 35 .)
Delay (See p. 44 .)
Mute* 3
Signal
indicator*
1
Gain (See p. 28 .)
Gain* 2 (See p. 28 .)
Unit name (See p. 13 .)
Zone assignment (See p. 35 .)
ARC filter (See p. 37 , p. 49 .)
Signal indicator * 1
Compressor/Noise gate (See p. 33 .)
Crossover (Xover) (See p. 40 .)
: Low-pass filter
: High-pass filter
: Band-pass filter
(High-pass filter + low-pass filter)
Input module (See p. 24 – p. 27 .)
Multi-band filter (See p. 30 .)
IP address* 4
Flow view