Toa DP-K1 - Manual (Page 70)

70
Connect the PC with the units by one of the following ways.
• Press the [Modify the Connection Settings] button to display the Check IP setting screen.
Change the network and unit ID settings, or update the firmware as needed.
For the setting, refer to
p. 63 .
• Press the [Skip the Searching Units] button to connect the PC to the unit for which connection has
been confirmed.
If unset units exist;
If no units have been set for the connection settings, the Check IP Settings screen is displayed.
If no units have been set;
Change the network or unit ID settings, or update the firmware as needed.
For the setting, refer to
p. 63 .