Toa DP-K1 - Manual (Page 5)

5
1. GENERAL DESCRIPTION OF THE DP-K1 SETTING SOFTWARE
The DP-K1 Setting Software performs settings for the following acoustic signal processing functions and the
modules built in the DP-K1 (hereinafter referred to as "unit"). To use the software, install it on the PC that
meets the requirements described here.
• Automatic resonance control (ARC) function
• Compressor function
• Noise gate function
• Filter function
• Crossover function
• Delay function
Settings can be performed regardless of whether the PC and the unit are in communication (online) or not
(offline). However, some operation or display is enabled only online such as automatic creation of sound field
correction filters (ARC function), ARC measurement, Level monitor view, and Mute all window.
The PC communicates with the unit via a network. While they are online, the PC can remotely control preset
memory recall and settings of acoustic signal processing functions on the unit in real time.
This software runs on the operating systems of Microsoft Windows 2000 and Windows XP.
A PC with a display set at high color (16 bits) or higher is recommended for use with this software.
Note
Windows is the trademark of Microsoft Corporation.