Toa DP-K1 - Manual (Page 32)

32
Scale... : Scale can be changed.
Q-Display: The method to indicate the Q value can be changed by selecting "Value" or "Octave
Band." (Available only when the parametric equalizer, notch filter or all-pass filter is
selected.)
"Fraction" and "Value" displays are available for the "Octave Band" display.
Fine Resolution: Selection of "Frequency" permits the frequency step width to be changed. If "Gain" is
selected, the gain step width can be changed.
(11) Option button
The following pull-down menu is displayed if you press this button.