To adjust bobbin tension – SINGER W211 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

THREADING THE BOBBIN CASE

Pull thread at least 3 inches from
bobbin. Insert bobbin in bobbin
case so that thread will unravel

clockwise.

Pull thread into slot of bobbin
case as shown in Fig. 2.

Tension Spring

Draw thread under the tension
spring and into the fork-shaped

opening of the spring as shown
in Fig. 3.

Pull thread through hole in
bobbin case finger as shown in
Fig. 4. (Recommended for

zigzag sewing only)

TO ADJUST BOBBIN TENSION;

• Turn screw on side of bobbin

case clockwise to increase
tension.

• Turn screw on side of bobbin

case counterclockwise to
decrease tension.

Advertising