SINGER W211 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BUTTONHOLES ON LIGHTWEIGHT OR KNIT FABRICS
Place cord string over tab on presser foot as shown.
After finishing the buttonhole, remove the foot from
the fabric, draw the loop of the cord string up to the
bar tack, tie the loose ends and trim the balance.
. • I
- •• •
■ Cord String
Position fabric in sewing area and attach button
hole foot to the machine. Sew the buttonhole so
that stitching covers cord string.