To remove, The presser foot, To attach – SINGER W211 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CHANGING THE PRESSER FOOT

Raise needle bar to highest

position and raise presser foot

as shown.

The extra lift for heavy fabric
rriakes it easier to place fabric

under the presser foot.

TO REMOVE
THE PRESSER FOOT:

• Press lever on back of presser

foot shank and foot will drop
from shank as shown above,

• It is not necessary to loosen

the thumb screw to change
presser foot.

TO ATTACH
THE PRESSER FOOT:

• Align desired presser foot to

shank as shown above.

• Lower presser foot lever and

shank will automatically attach
to foot as shown above.

Advertising