Cleaning and oiling the hook assembly, Cleaning feed dogs – SINGER W211 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Caution;

Eilelore cleaning Ihe machine, be sure to disconnect

the power cord trom Ihe wall outlet

CLEANING THE MACHINE

CLEANING AND OILING THE HOOK ASSEMBLY

• Raise the needle bar to the highest position.
• Open the hinged shuttle cover and remove the

bobbin case with bobbin.

• Remove lint or dust with a soft cloth or lint brush

• Use only the oil in the accessory box.
• Replace bobbin case (See page 8 ‘or

instructions).

CLEANING FEED DOGS

• Lint or dust accumulated between the needle

plate and the feed dogs must be removed to
maintain good operation of the machine.

• Raise the needle barto the highest position and

remove the needle and presser foot.

• Loosen screw on the bed cover plate and remove

the plate.

• Clean lint and dust from the bottom of the needle

plate and the feed dogs with a lint brush.

• Turn the hand wheel slowly and be sure to clean

all areas.

• Replace the removed plate.

26

Advertising