Adjusting feed dog height – SINGER W211 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ADJUSTING FEED DOG HEIGHT

(TWIN NEEDLE UPPER THREADING)

Follow threading instruction for single needle with

these exceptions.

Place thread, matching or contrasting in color, on

both spool pins.

Draw threads through thread guides as normal, but

separate the threads at the tension.

Pass thread through the left disc and one thread

through the right disc.

Now treat both threads as one until you reach the

needle eyes.

ZIGZAG DIAL: Set at desired width between "O" and

"3", if you set dial hi^er than 3, the needle will hit the

needle plate and break.

STITCH LENGTH: Set at desired stitch length.

Upper position of feed dog is used for normal sewing.

To raise feed dog.

• Press drop feed button ".^"located under shuttle cover, to

upper position.

Lower position is used for Embroidering, Mending or

Sewing on Button. Press drop feed button “M" to

lower position.

11

Advertising