Stitch length control dial, Reverse stitch button – SINGER W211 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before starting to sew, turn the hand
wheel toward you until the needle is
at its highest point. NEVER run ma
chine without material under presser
foot.
Place material and threads in position
under the presser foot and lower the
presser foot.
You are ready to begin sewing, by
having the needle at its hand wheel to
start the machine.
TO REMOVE MATERIAL, be sure to
stop the machine when the needle bar is
located at the highest point. Now raise
the presser foot with the presser bar lifter,
then draw the fabric back and to the left,
and cut the threads with the thread cutter.
0 a 1 • 2 ■ 3 ■ 4
STITCH LENGTH
CONTROL DIAL
• Numbers on dial denote
length of stitches.
• To increase length of stitch,
turn dial to higher number.
STITCH LENGTH GUIDE
Numbers
on dial
0
1
2
3
4
Stitches
per inch
No
Feed
24
12
6
6
REVERSE STITCH BUTTON:
• Use for reverse stitching or
tacking.
• Keeping button pressed in will
allow you to sew reverse stitch
at same length as forward
stitch.
15