Procedure, Quilting – SINGER W211 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
QUILTING
. 4
Needle Position Selector and
Zigzag Width Control Dial
Stitch Length
Control Dial
PROCEDURE:
• Insert the quilter guide bar into the notch under the spring on the
shank and adjust the position according to the desired distance
between quilting seams,
• Stitches are easily aligned by guiding the quilter guide along the
previous seam line.
94
Advertising