Important safety instructions, A danger, A warning – SINGER 14SH754/14CG754 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image


When using this machine, basic safety precautions should always be followed including the following.

Read all instructions before using the machine.


- To reduce the risk of electric shock:

The machine should never be left unattended when plugged in. Always unplug the machine from the

electric outlet immediately after using and before cleaning.


To reduce the risk of burns, fire, electric shock or injury to persons:

Be sure that the electrical voltage of the electric outlet (wall receptacle) is the same as the rated voltage of

the motor.

Use this machine only for its intended use as described in this Operator’s Guide. Use only attachments

recommended by the manufacturer as contained in the Operator s Guide.

To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

Disconnect the power line plug from the socket outlet or switch the machine off when making any adjustments

in the needle area, such as threading needle and loopers, changing needle, changing throat plate or

changing presser foot, etc.

Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making

any other user servicing adjustments mentioned in the Operator’s Guide

Do not attempt to adjust the motor belt. Contact your nearest Service Center should any adjustment be


Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Handle the foot controller with care and avoid dropping it on the floor. Be sure not to place anything on top

of it.

Always use the proper throat plate. The wrong plate can cause the needle to break.

Do not use bent needles.

When sewing, keep fingers away from all moving parts. Special care is required around the sewing

machine needle.

Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

Use only the handle to lift and move the machine.

Never operate the machine if it has a damaged cord or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into the water. Return the machine to the nearest authorized dealer or
Service Center for examination, repair, electrical, or mechanical adjustment.

Never operate the machine with any air openings blocked. Keep ventilation openings of the machine and

foot controller free from the accumulation of lint, dust and loose cloth.

Never drop or insert any object into any opening.

This manual is related to the following products: