Selection of stitches – SINGER 14SH754/14CG754 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. SELECTION OF STITCHES
This machine is capable of producing various types ot stitches according to the combination of needle positions,
threading methods, tension adjustment.
Stitch Type
Reference
Pages
1. Two-thread
wrapped edge
overlook
(502)
1
-needle
2
-thread stitch is used for
light weight or knits fabrics. Also,a
3.5mm and 5.7mm wrapped overtook
seam width can be obtained by
changing the needle position.*
30
i . . 4
Two-thread
standard rolled
hem stitching
1
-needle
2
-thread stitch is used for
overedge
seaming,blindstitch
hemming on edge finishing operations.
Also,a 3.5mm and 5.7mm standard
rolled hem seam width can be obtained
by changing the needle position.*
(503)
31
3. Three-thread
Overlock
1-needle 3-thread stitch is used for
overedging and seaming on common
fabrics. Also, a 3.5mm and 5.7mm
overlook seam width can be obtained by
changing the needle position,"
(504)
32
Three-thread
Flatlock
1-needle 3-thread stitch is used for butted
or lapped seams and ornamental stitching
with decorative thread. Also, a 3.5mm and
5.7mm flatlock width can be obtained by
changing the needle position.*
(505)
33
5. Three-thread
Wrapped Edge
Overlook
imm
1-needle 3-thread stitch is used for sewing
narrow rolled hems or ornamental edges.
Also, a 3.5mm and 5.7mm wrapped
overlook seam width can be obtained by
changing the needle position *
34
6
. Four-thread
Stretch Mock
Safety Stitch
2-needle 4-thread stitch which is ideal for
medium to heavy weight stretchy fabrics
such as double knits and swim wear.
(514)
35
Depending on the needle positions used, this machine can sew 3-thread standard width 3.5mm overedge and
a 5.7mm wide overedge seams.