SINGER 14SH754/14CG754 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[ How to Replace the Stationary Kni^
disconnect power line plug from the wall
The stationary knife should be changed when it
The stationary knife can be replaced according to
the directions provided, however if there are any
representative to make the adjustments.
Be sure that the power line plug is disconnected
from the electric source.
Open the looper cover and set the movable upper
knife 1 in the nonworking position (page 25).
Loosen the stationary knife set screw 2 and remove
the stationary knife 3 .
• Place a new stationary knife in the groove of the
stationary knife holder.
• Tighten stationary knife set screw 2 .
• Return the movable upper knife 1 to its working