Adjusting needle-thread tension, Adjusting stitch length – SINGER 4022 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fe«M4 ««««« (
needle-ttiread tension than straight
Make a test sample with the fabric
and thread you plan to use so that
you can adjust the tension properly.
The stitches should be flat against
the fabric without causing the fabric
If the stitches are not flat and the
fabric is puckered, lower the needle"
thread tension by turning the dial to
a lower number.
Adjusting Stitch Length
Any stitch length setting from 1 to 4
will give you an open zig-zag stitch.
The higher the number, the more
open, or farther apart your stitches
The area between 0 and 1 on the
dial is used for the adjustment of
zig-zag satin stitching, a series of
closely spaced plain zig-zag stitches
that form a smooth, satin-like sur
face. (Refer to page 26 for informa
tion on satin stitching.)