SINGER 4022 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
plug from your socket outlet.
Interior Feed Area — 4022
To clean and oil inside feed area,
remove cover. Using a large screw
driver, remove screws A and B.
Periodically apply a drop of oil only
to areas indicated after cleaning.
Interior Feed Area — 4012
To clean and oil feed area, tilt
machine on Its side, and periodically
apply a drop of oil only to indicated
Apply a few drops of oil to oiling
points, and with presser foot up, run
machine for a few minutes. Then
wipe up any excess oil
CAUTION: Do not attempt to adjust
the motor belt. Contact your nearest
Service Centre should any adjust
ment be required.