SINGER 4022 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Mock Overedge

This finish is appropriate for bulky

knits, fine tricots and fabrics that
curl or fray.

Method 2

® Make a test sample.

® Baste the garment together on

the seam line and fit in the usual

After making any necessary ad­

justments, suggested in Method

1, place seam under grosser foot.

Stitch so that the stitches on the

left side of the pattern penetrate
the basted seam line.

® Press after stitching and trim

away excess fabric to produce, a

narrow seam edge. When the

seam supports the garment, omit
the trimming step and press seam
open in the usual way.

Overedged Seam Finish

® Pattern Selector: 7

® Stitch Width: S

® Stitch Length: 3-4

® General Purpose Needle Plate

® General Purpose Foot

o Trim seam edges evenly.

9 Place stitching over the trimmed

edge of the seam allowance as



This manual is related to the following products: