Buttonholes, Garment preparation, Buttonhole position – SINGER 4022 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Your new machine comes complete
with a built-in four-step buttonhole
system. Before sewing on your
garment, always make a test but
tonhole duplicating the number of
thicknesses of fabric and interfac
ing, if appropriate.
Accurate guidelines are essentia! to
keep buttonholes at a uniform dis
tance from ttie edge of the garment,
evenly spaced, and on the grain of
1. Mark the centre line on the gar
ment. This guideline can be made
by machine or hand basting or
using tailor's chalk.
Be sure that the space from the
centre line to the finished edge of
the garment is at least equal to
three-quarters the diameter of the
button. With this spacing, the button
will not extend beyond the edge
when the garment is buttoned.
Make sure that the centre line
marking follows a lengthwise fabric
A. Centre Line
B. Buttonhole •
C. Finished Edge of Garment
D. Distance of Button