SINGER 4022 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Four“Step Buttonholing
Procedure

Step A: Bar Tack
Turn pattern selector to AC. With

buttonhole foot properly positioned,
as described on ttio previous page,
position needle in fabric at point 1.
Take at least four stitches ending at
point 2.

Step B: Side Stitching
Raise needle above the fal.)ric by

turning hand wheel toward you.
Turn pattern selector to B. Stitch to

the end of the buttonhole. Stop
stitching at point 3.

Step C: Bar Tack

Raise needle above fabric. Turn

pattern selector back to AC. Take at
least four stitches ending at point 4.

Step D: Side Stitching
Raise needle above fabric. Turn

pattern selector to the right to D.

Stitch to the end of buttonhole.

« Remove work. Using a hand

sowing needle, bring threads to
underside of fabric. Fasten and
trim thread ends.

45

Advertising
This manual is related to the following products: