SINGER W8910 - Manual (Page 16)

Accessory box
A
r*ac'c
r*T 7
■1 xvwwaav-fi y ukj ^
To obtain the best sewing results you should select the
correct presser foot for the type of sewing you are doing.
The presser feet are marked with letters and the lights on
the lower panel indicate the suitable presser foot for the
type of work you have chosen.
By means of these feet you will be able to carry out
practically all types of sewing work. There are additional
accessories to assist you with special work. These will be
foimd under “Extra accessories” on pages 55—58.
Store the accessories in the accessory box. By placing
them as illustrated, it will be easier for you to remove
and replace the box.
We reserve the right to change the equipment of the
machine and the assortment of extra accessories without
prior notice.
Presser foot A
The presser foot which is fitted on the machine on
delivery is marked A. This foot is used mainly for
straight stitching and zig-zag stitching with a stitch length
longer than 1 mm.
Presser foot B
When sewing close zig-zag stitches with less than 1
mm stitch length; other utihty stitches or decorative
stitches; you should use presser foot B. The bottom of
the foot is designed to give more space for the stitches.
Presser foot J
This foot is used for overcasting, joining and overcast­
ing, i.e. stitches which have a stitch width of 5 and 6 mm.
The pin prevents puckering at the edge of the fabric.
Decorative presser foot
Use this foot for decorative stitches. It is completely
transparent, making it possible to match stitch patterns.
Various markings
As you can see from the illustration, the above presser
feet have notches or markings which can be used as
guides when sewing. When straight stitching with the
needle in the center position, you will have a 7 mm (1/4")
seam allowance if you guide the fabric even with the
outer edge of the foot; 4 mm (3/16") at the iimer edge
and 2 mm (3/32") at the innermost notch on presser foot A.