Sewing in zippers, Lapped zipper, Stitches of personal choice – SINGER W8910 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Stitches of personal choice

Sewing in zippers

The zipper foot E can be attached so that

it is located either to the right or to the left
of the needle, making it easy to sew both
sides of the zipper. To sew the other side of
the zipper, re-position the zipper foot.

Lapped zipper

Baste the opening together. Leave

approx. 2 cm (3/4") open at the top. Turn
the work so that the wrong side is up. Fold
the left seam allowance outward a couple of
mm from the basted seam.

Attach the zipper foot to the left of the

needle. Use the lower needle stop position.
Place the zipper with the right side up
under the folded seam allowance and sew
the right edge of the zipper, starting at the
bottom. Open the zipper a couple of cm (1")
before the seam is finished, raise the zipper
foot and pull the tab behind the foot. Lower
the foot and finish the seam.

Re-position the zipper foot to the right of

the needle. Sew the other side of the zipper
into place from the right side of the fabric.

Start with perpendicular stitching at the
lower edge and then sew from the bottom
to the top.

Remove the basting.

34

Advertising