How to exchange light bulb – SINGER 14U454B Ultralock User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• HOW TO EXCHANGE LIGHT BULB
Danger:
Always unplug before relamping.
* Light bulb is available at your Singer shop. Take
old bulb to the Singer shop and ask for same bulb.
* If voltage indicated on the electrical rating plate of
your machine is 110
127V, ask for light bulb
conforming to following specification.
Bayonet type 110
• Glass shape
• Lamp cap
• Overall length
127V 15W
T-20
BA 15D/19
48 mm
* Remove light cover screw and while pushing the
cover lightly to the rear, swing cover to the left
and remove from machine as shown in the illust
ration. Turn bulb to the left to remove. To replace
the bulb, push bulb into the socket and turn to the
right.
* If voltage indicated on the electrical rating plate of
your machine is 200 ^ 240V, ask for light bulb
conforming to following specification.
Edison type (screw type) 200 ~ 240V 15W
• Glass shape
T-22
• Lamp cap
E14
• Overall length 56mm
* Remove light cover screw and while pushing the
cover lightly to the rear, swing cover to the left
and remove from machine as shown in the illust
ration. Turn bulb to the left to remove. To
replace, screw bulb into socket turning it to the
right.
42