How to open looper cover, Caution, Principal parts behind looper cover – SINGER 14U454B Ultralock User Manual
Page 8: Preparation prior to sewing, Principal parts behind looper cover 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. HOW TO OPEN LOOPER COVER
* Push the cover to the right as far as it will go. 0
* Pull cover down toward you. @
Caution:
Be sure looper cover is closed when sewing.
5. PRINCIPAL PARTS BEHIND LOOPER
COVER
0 Upper looper
0 Movable upper knife
0 Presser foot
0 Stationary lower knife
© Lower looper
6. PREPARATION PRIOR TO SEWING
* Connect the controller/electric plug 0 to the
machine receptacle © .
* Plug power line @ into electric outlet © .
* Power switch
Push ‘‘I” mark side
(used also for light switch) to turn “ON”
I
Push “0” mark side
to turn “OFF”
* To run the machine and control the speed, press
the controller.
* The harder you press, the faster the machine will
sew.
* To stop the machine from sewing, remove your
foot from the controller.
Be sure to make reference to "Warning'
on following page.