SINGER 15-91 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16
To Prepare for Sewing
With the left hand hold the end of the thread,
leaving it slack from the hand to the needle. Turn
F
ig
. 13. D
u
-
vwing
Ur
the
B
obbin
T
hkbad
the balance wheel over toward you until the needle
moves down and then up to its highest position,
thus catching the bobbin thread. Draw up the needle
thread and the bobbin thread will come up with it
through the hole in the throat plate, as shown in
Fig. 13. Lay both threads back under the presser
foot.
To Commence Sewing
Place the material beneath the presser foot,
lower the presser foot and commence to sew.
When sewing thick material, it may be necessary
to turn the balance wheel over toward you to start
the machine. This should also be done if the machine
stops when sewing across thick seams.