SINGER 15-91 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Connect the Machine to
Electric Service Line
Push the terminal plug at one end of the electric
cord as far as it will go on the three-pin terminal
block at the right of the machine. Attach the plug
at the other end of the cord to the nearest electric
light socket and the machine is ready for operation.
To Insure Perfect Action of the Machine
The balance wheel must always turn over toward
the operator.
Do not run the machine with the presser foot
resting on the feed without cloth under the presser
foot.
Do not mn tlie machine when both bobbin case
and needle a.rc tlii'cadi'd, unless there is material
under the presser foot.
Do not ti’
3
'- to help the machine by pulling the
fabric, lest you bend the needle. The machine feeds
the work without assistance.
The slide over the bobbin case should be kept
closed when the machine is in operation.
To Turn Singerlight “On” or “Off”
Reach under the machine arm and move the
switch (A, Fig. 2) to the right or left as desired.
CAUTION
When you have finished your sewing, always dis
connect the plug from the electric socket.